YX18-76-836 Galvanized Corrugated Sheet For Warehouses / Agricultural Buildings
YX18-76-836 Galvanized Corrugated Sheet
,Agricultural Buildings Galvanized Corrugated Sheet
,Warehouses Galvanized Corrugated Metal Roofing Sheet
Product Overview
The YX18-76-836 galvanized corrugated sheet is a roll-formed zinc-coated steel profile with an 18 mm wave height and an effective cover width of 836 mm. This listing serves buyers who need a mid-wave corrugated profile. The 18 mm wave sits between the shallow YX15 and the deep YX35 profiles, giving a practical choice for roofs and side walls where a smooth finished appearance and defined geometry are both important. It targets contractors, building-material wholesalers, and importers who want a defined, repeatable profile with a wider cover width for efficient area coverage.
Key Features / Buyer Benefits
- 18 mm wave height defines the mid-wave geometry of this profile.
- 836 mm effective cover width enables efficient area coverage.
- Galvanized substrate delivers uniform corrosion protection.
- In-house roll forming ensures consistent geometry and repeatable fit.
- Grade and zinc-coating options allow matching to the required corrosion requirement.
Technical Specifications
| Item | Value |
|---|---|
| Profile | YX18-76-836 |
| Wave height | 18 mm |
| Effective cover width | 836 mm |
| Material | Galvanized (zinc-coated) steel |
| Grade | DX51D+Z to S350GD+Z |
| Zinc coating | Z40 to Z275 |
| Finished thickness | 0.3–1.2 mm |
| Applicable / Referenced Standards | GB/T 12755 (as applicable) |
| Quality Management System | ISO 9001 |
Applications
Used for roofs and walls of factories, workshops, warehouses, agricultural buildings, and light commercial structures. The mid-wave profile works well both as a roof covering and as side-wall cladding where a smooth, clean line is desired.
Listing-Specific Technical Focus
The identity is the YX18-76-836 geometry: an 18 mm wave on a 76 mm pitch with 836 mm effective coverage. The wider cover width differentiates it from the YX35-125-750 and YX15-225-900 profiles, offering a different combination of aesthetics, cover width, and profile geometry.
Manufacturing / Customization Capability
Produced in-house on dedicated YX18-76-836 roll-forming tooling from galvanized coil. Grade, zinc coating, finish thickness, and cut length can be matched to project requirements within governed ranges.
Why Choose KYZOTECH
kyzotech (Nanjing Shunshuo New Material Technology Co., Ltd.) supplies galvanized profiled sheets from in-house roll-forming lines under an ISO 9001 system, providing reliable geometry control for the YX18-76-836 profile on repeat B2B orders.
FAQ
Q: What is the effective cover width of YX18-76-836?
The effective cover width is 836 mm, used as the design module for coverage calculation.
Q: What wave height does this profile have?
The wave height is 18 mm, a mid-wave profile within our governed corrugated range.
Q: Can this be used on walls as well as roofs?
Yes, the mid-wave profile is commonly used for both roof covering and side-wall cladding.
Q: What grades and zinc coatings are available?
Galvanized grades from DX51D+Z to S350GD+Z, with zinc coating from Z40 to Z275.
Q: What finished thickness do you supply?
Finished thickness from 0.3 mm to 1.2 mm, matched to the application.
Inquiry CTA
Please provide finished thickness, grade, zinc coating, sheet length, quantity, and destination, and confirm the YX18-76-836 profile so we can check it against in-house tooling and prepare an accurate offer.
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
